MAKE A PLEATED VALANCE in 2 HOURS or LESS!

Only 2 to 3 yds. of Decorator Fabric Needed

Description

View A - The Pleated Valance, lined in off-white drapery lining, can be made in eight pre-determined sizes. If your window size is not listed below, select the next higher size. For example, if your window width is between 30–34", make the 35" valance. In these cases, the valance will be slightly wider than your window and will extend onto the wall on each side by one or two inches - which is fine.

Decorative trim highlights the bottom edge. The valance is easily stapled to a 1" × 3" (2.5cm × 7.5cm) pine board. View A has a center depth of 17" (42.5cm) and a side depth of 20" (50cm). View B has a 15" (37.5cm) depth. View C has a center depth of 15" (37.5cm) and a side depth of 20" (50cm).

View B or C will feature the same number of pleats but the bottom edges will be cut as shown on envelope back.

Fabric Store - for all views

• Decorator Fabric - Select a solid or print fabric. Be sure to read next section on Selecting Fabric and Trims before purchasing.
• Lining - Select a white or off-white drapery lining fabric. Sun resistant or water resistant linings are recommended. Purchase lining the same width as your decorator fabric, if available.
• Decorative Trim - This is what we’ve featured on the pattern envelope: View A- Fringe trim, View B - Braid Trim, View C - Bead trim. You can use any of these trims for any of the views. Read next section on Trims to learn more.
• Thread - Select one that closely matches the background color of the decorator fabric.
• Optional - Specially formulated fabric glue for gluing trim to treatment - our favorite method for applying trim!